Electronic devices made from the so-called thread-based transistors (TBTs) could be woven into fabric, worn on the skin, or one day be implanted surgically for diagnostic monitoring.
In a study published in ACS Applied Materials and Interfaces, the authors describe engineering the first TBTs which they said can be fashioned into simple, all-thread based logic circuits and integrated circuits. The circuits are claimed to replace the last remaining rigid component of many current flexible devices, and when combined with thread-based sensors, enable the creation of completely flexible, multiplexed devices.
The field of flexible electronics is growing, with most devices achieving flexibility by patterning metals and semiconductors into bendable "wavy" structures or using flexible materials such as conducting polymers. These "soft" electronics are enabling applications for devices that conform and stretch with the biological tissue in which they are embedded, such as skin, heart or even brain tissue.
In comparison, thread-based electronics have superior flexibility, material diversity, and the ability to be manufactured without the need for cleanrooms, the researchers said. The thread-based electronics can include diagnostic devices that are extremely thin, soft and flexible enough to integrate with the biological tissues that they are measuring.
Engineers at Tufts in Massachusetts previously developed thread-based temperature, glucose, strain, and optical sensors, plus microfluidic threads that can draw in samples from, or dispense drugs to, the surrounding tissue. The thread-based transistors developed in the latest study allow the creation of logic circuits that control the behaviour and response of those components.
The authors created a multiplexer and connected it to a thread-based sensor array capable of detecting sodium and ammonium ions, which are biomarkers for cardiovascular health, liver and kidney function.
"In laboratory experiments, we were able to show how our device could monitor changes in sodium and ammonium concentrations at multiple locations," said Rachel Owyeung, a graduate student at Tufts University School of Engineering and first author of the study. "Theoretically, we could scale up the integrated circuit we made from the TBTs to attach a large array of sensors tracking many biomarkers, at many different locations using one device."
Making a TBT involves coating a linen thread with carbon nanotubes, which create a semiconductor surface. Attached to the thread are two thin gold wires - a "source" of electrons and a "drain" where the electrons flow out (in some configurations, the electrons can flow in the other direction). A third wire - the gate - is attached to material surrounding the thread, such that small changes in voltage through the gate wire allows a large current to flow through the thread between the source and drain.
According to Tufts, a critical innovation in this study is the use of an electrolyte-infused gel as the material surrounding the thread and connected to the gate wire. In this case, the gel is made up of silica nanoparticles that self-assemble into a network structure. The electrolyte gel (ionogel) can be deposited onto the thread by dip coating or rapid swabbing. In contrast to the solid-state oxides or polymers used as gate material in classical transistors, the ionogel is resilient under stretching or flexing.
"The development of the TBTs was an important step in making completely flexible electronics, so that now we can turn our attention toward improving design and performance of these devices for possible applications," said Sameer Sonkusale, professor of electrical and computer engineering at Tufts University School of Engineering and corresponding author of the study.
Promoted content: Does social media work for engineers – and how can you make it work for you?
So in addition to doing their own job, engineers are expected to do the marketing department´s work for them as well? Sorry, wait a minute, I know the...