It is claimed the air waveguides - developed by Howard Milchberg and his lab at the University of Maryland - could have many applications, including long-range laser communications, detecting pollution in the atmosphere, making high-resolution topographic maps and laser weapons.
Because light loses intensity with distance, the range over which such tasks can be done is limited. Lasers, which produce highly directed beams, lose focus due to their natural spreading, or worse, due to interactions with gases in the air. Fibre-optic cables can trap light beams and guide them like a pipe, preventing loss of intensity or focus.
A single waveguide could be used to send out a laser and collect a signal
Typical fibres consist of a transparent glass core surrounded by a cladding material with a lower index of refraction. When light tries to leave the core, it gets reflected back inward. But solid optical fibres can only handle so much power, and they need physical support that may not be available where the cables need to go, such as the upper atmosphere. Now, Milchberg’s team has found a way to make air behave like an optical fibre, guiding light beams over long distances without loss of power.
Milchberg’s air waveguides consist of a ‘wall’ of low-density air surrounding a core of higher density air. The wall has a lower refractive index than the core—just like an optical fibre. In a paper published in Optica, Milchberg, a professor of physics and electrical and computer engineering; physics graduate students Eric Rosenthal and Nihal Jhajj; and associate research scientist Jared Wahlstrand, broke down the air with a laser to create a spark.
An air waveguide conducted light from the spark to a detector about a metre away. The researchers say they collected a strong enough signal to analyse the chemical composition of the air that produced the spark.
The signal was 1.5 times stronger than a signal obtained without the waveguide. Over distances that are 100 times longer, where an unguided signal would be severely weakened, the signal enhancement could be much greater.
Milchberg created his air waveguides using very short, very powerful laser pulses. A sufficiently powerful laser pulse in the air collapses into a narrow beam, called a filament. This happens because the laser light increases the refractive index of the air in the centre of the beam, as if the pulse is carrying its own lens with it.
Milchberg showed previously that these filaments heat up the air as they pass through, causing the air to expand and leaving behind a ‘hole’ of low-density air in their wake. This hole has a lower refractive index than the air around it.
While the filament itself is very short lived (less than one-trillionth of a second), it takes a billion times longer for the hole to appear.
On Feb. 26, 2014, Milchberg and his lab reported in the journal Physical Review X that if four filaments were fired in a square arrangement, the resulting holes formed the low-density wall needed for a waveguide. When a more powerful beam was fired between these holes, the second beam lost hardly any energy when tested over a range of about a metre. Importantly, the ‘pipe’ produced by the filaments lasted for a few milliseconds, a million times longer than the laser pulse itself. For many laser applications, Milchberg said, milliseconds equate to infinity.
Because the waveguides are so long-lived, Milchberg believes that a single waveguide could be used to send out a laser and collect a signal.
‘It’s like you could just take a physical optical fibre and unreel it at the speed of light, put it next to this thing that you want to measure remotely, and then have the signal come all the way back to where you are,’ Milchberg said in a statement.
He now needs to show that these waveguides can be used over distances of at least 50m.
In use, air waveguides could be used to conduct chemical analyses in the upper atmosphere or within nuclear reactors, where it’s difficult to get instruments close to what’s being studied. The waveguides could also be used for LIDAR, a variation on radar that uses laser light instead of radio waves to make high-resolution topographic maps.
Promoted content: Does social media work for engineers – and how can you make it work for you?
So in addition to doing their own job, engineers are expected to do the marketing department´s work for them as well? Sorry, wait a minute, I know the...