ProSolv® is an alternative chemistry developed by EnviroTech to replace chlorinated solvents. It can be used in most existing vapour degreasing equipment and can be used safely for immersion cleaning using ultrasonics, for which it has been optimised. with a high specific gravity and very low surface tension.
ProSolv® unlike chlorinated and other halogenated hydrocarbons solvents, such as trichloroethylene , it can be used for manual cleaning in a suitably ventilated area. Typical applications are high performance critical cleaning at lower cost than other fluorinated solvent cleaners. Vapour degreasing for medical, aerospace, optics, oxygen equipment service, high vacuum components and electronics.
ProSolv® is an excellent choice to replace flammable solvents such as MEK, Acetone, Iso propyl alcohol (IPA) or hydrocarbons where manual wiping or brush cleaning is the preferred method. An azeotropic blend which can be recycled by distillation for reuse through many cycles. It is a very stable mixture with no need for monitoring or the need for additives or stabilisers.
ProSolv® offers a cost-effective alternative for halogenated solvents in formulations for dip, spray or aerosol applications and as a fast-drying carrier solvent for oil, silicones and other lubricants.
Benefits of using ProSolv® for vapour degreasing and cleaning:
- Non-flammable (No Flash Point) with high solvency (KB Value 91)
- Low surface tension, low boiling point makes it highly productive and economical in use
- Stable in use no additives or testing required, Leaves minimal Non-volatile residue
- Contains no hazardous air pollutants and safe for users. Zero ozone depletion (ODP)
- Very low global warming potential (GWP) SNAP approved for vapour degreasing and emissive uses.
- Compatible with metals and most plastics
- Manufactured in UK with excellent customer service, technical support and training from qualified distributors throughout Europe
For more information please visit: www.vapour-degreasing.com/prosolv/
ProSolv® is supplied by:
EnviroTech Europe Ltd.
46 high Street, Esher, Surrey
KT10 9QY United Kingdom
Tel +44 (0) 208 281 6370
Promoted content: Does social media work for engineers – and how can you make it work for you?
So in addition to doing their own job, engineers are expected to do the marketing department´s work for them as well? Sorry, wait a minute, I know the...