The FMT-W40 is a motorized wire-terminal pull tester that comes in two models—one with a tensile strength capacity of up to 500 N (110 lbf) and the other one with up to 1000 N (220 lbf).
The FMT-W40 pull tester is robust, small-sized and occupies very less space on the benchtop. It has been designed particularly to ensure simple use even with very less training. It is a perfect solution to test the pull strength of crimped wire terminals exactly at the production point.
The FMT-W40 pull tester features a motor drive that allows wire terminals to be pull tested at a stable pull speed, thus ensuring greater testing repeatability. The FMT-W40 incorporates seven different test speeds as needed by the corresponding testing standards.
Three user-selectable test modes enable both non-destructive and destructive testing: pull and hold; pull and break; pull, hold and then break.
The FMT-W40 pull tester is appropriate for testing tensile pull strength of wire connectors and terminals in compliance with BS, DIN, EN, IEC, MIL, NASA, SAE and UL standards.
Key features
- Acquisition rate: 1000 times/second
- Accuracy: ±0.5% of full-scale (f.s.)
- Display: LCD 5 digits, 14 mm tall
- Output: through USB 2.0 Interface
- Memory: 1000 readings with max, min, mean and standard deviation calculations
- Maximum operating force: 120% of f.s. (auto-reverses to release load if the limit is exceeded)
- Pull speed settings (mm/minute): 10, 25, 37.5, 50, 100, 150 and 200
- Dimensions (L x W x H): 320 mm x 160 mm x 115 mm
- Available with: Standard—Pull Tester equipped with Crimp Receptacle and Cable Cam fixtures, power supply, CD-ROM with software (trial version: no license) and USB interface cable. Optional—Operating instructions including CE declaration of conformity (printed), software license, Dakks (German) calibration certificate, carrying case (to be ordered separately on demand) and interchangeable adapter.
For more information visit https://www.mecmesin.com/motorised-force-test-stands/motorised-pull-tester
Or contact PPT Group UK Ltd t/a Mecmesin
T: +44 (0) 1403 799979
E: info@mecmesin.com
Promoted content: Does social media work for engineers – and how can you make it work for you?
So in addition to doing their own job, engineers are expected to do the marketing department´s work for them as well? Sorry, wait a minute, I know the...