Piezoelectric printing opens new fields for sensors and energy harvesting

Australian team devise method for large-scale two-dimensional surface deposition of piezoelectric material, allowing direct integration onto microprocessors

piezoelectric
Atomic force microscopy imaging of 2D GaPO4 and piezoelectric measurements at varying applied voltages. Image: FLEET

Piezoelectric materials, which generate a voltage in response to mechanical deformation, are finding increasing numbers of applications in devices like accelerometers and energy harvesting from movement. However, until now it has not been possible to manufacture such materials in large sheets, which mean that they could be integrated directly onto silicon chips. Instead, separate components have to be embedded onto silicon substrates, increasing their manufacturing cost and limiting their more widespread usage.

piezoelectric
A schematic for the process to make gallium phosphate sheets. Image: FLEET

Researchers from the Future Low Energy Technologies centre of excellence (FLEET) at the Royal Melbourne Institute of Technology have now developed a low-cost method to produce two-dimensional sheets of gallium phosphate, a quartz-like material used in piezoelectric pressure sensors since the 1980s. Particularly useful in the high-temperature applications, it has not previously been used as a two-dimensional material because it does not naturally crystallise in a layered structure.

The FLEET team, led by Prof Kourosh Kalantar-zadeh, last year developed a technique for making two-dimensional materials based on dissolving metals in liquid metal, to create two-dimensional layers of oxides which did not previously exist as layered structures. They described this process in a paper in Science. "We adopted the liquid-metal material deposition technique we developed recently to create 2D films of GaPO4 through an easy, two-step process," said Prof Kalantar-zadeh.

The two steps involved are firstly, to exfoliate gallium oxide from the surface of liquid gallium, which is possible because the oxide does not have any affinity to the bulk of liquid metal. The second stage is to print that film onto a substrate and transform it into gallium phosphate by exposure to phosphate vapour. The team describes the process in a paper in Nature Communications. Prof Kalantar-zadeh has moved to the University of New South Wales since completing the research.

The process can be used to make gallium phosphate nanosheets with areas of several square centimetres and unit cell thickness. Testing this material with a piezo- force microscope showed it to have a high out of plane piezoelectric coefficient of 8 to 10 pm/V, sufficiently high to be suitable for piezoelectric sensing and energy harvesting, the team claims.

MORE NEWS HERE