Detecting whether a piece of equipment or a component has been tampered with is now easier thanks to a new product from Henkel.
Loctite 7414 is a blue, fast drying, high viscose paste that has been developed for use on compression fittings, studs, nuts, parts and assemblies after they have been set to proper tension or position.
‘This is a simple and inexpensive method of warranty protection,’ states Colin Chapman, Marketing Manager at Henkel, manufacturer of Loctite products. ‘One stripe of the product is applied once all adjustments have been made. There is no dripping and within 60 seconds the paste is dry to touch.’
Once it is fully cured, the product fractures if the components are moved, allowing service personnel to quickly spot any changes or tampering with equipment.
Loctite 7414 adheres readily to metals, including aluminium, magnesium, titanium, stainless steel and copper – and is non-corrosive to these metals. It has an operating temperature range of -35°C to +145°C.
For more information please contact:
Henkel Limited
Technologies House
Wood Lane End
Hemel Hempstead
Hertfordshire
HP2 4RQ
Telephone: +44 (0) 1442 278100
Fax: +44 (0) 1442 278293
www.loctite.co.uk
Email: technicalservice.loctite@uk.henkel.com
For more infomation on this company click here
Promoted content: Does social media work for engineers – and how can you make it work for you?
So in addition to doing their own job, engineers are expected to do the marketing department´s work for them as well? Sorry, wait a minute, I know the...