The sensor developed by the team from the Universities of Glasgow, Southampton and Loughborough is made from a composite of carbon fibres and silicon rubber, and is said to work without battery power or onboard processing.
The flexible sensor’s ability to absorb and reflect radio frequency (RF) signals varies with atmospheric heat or cold, enabling the sensing of temperature across a much greater range than other comparable devices. It can also withstand thousands of cycles of bending and stretching without losing its sensitivity to temperature.
Temperature sensors are found in almost all electronic devices, and the global market for the technology is currently valued between $5-8bn.
Typical temperature sensors – thermistors - work by changing resistance in response to changes in temperature. However, they are usually only capable of measuring over narrow ranges of temperature variation, meaning temperature sensors often rely on an array of different thermistors to cover a wide sensing range.
The new soft, flexible temperature sensor, developed by a team led by researchers from Glasgow, can read temperatures from 30°C to over 200°C.
This could make help make future wireless sensors cheaper and more sustainable, as fewer devices will now be required to cover the same temperature sensing range.
In a paper published in Nature Communications, the researchers show how they used a 3D printer to mould the flexible material and integrated it into components like antennas, RFID labels, and resonators. Then they tested its ability to absorb RF radiation at different temperatures ranging up to 300°C.
In a statement, research lead Dr Mahmoud Wagih, UK IC Research Fellow and lecturer at Glasgow University, said: “Sensors are the main interface between the analogue world and smart devices. To communicate real-world changes in measurements like temperature or humidity to wireless smart devices, those measurements first need to be digitised.
“We designed a simple soft composite using common silicone and carbon fibres, which can be easily moulded into any shape. These skin-like substrates could be used to design antennas over large areas, which can then radiate signals that are highly sensitive to temperature changes.
“Many researchers have used RF and microwave devices to measure liquid formulations, temperature, humidity, and other physical and chemical parameters. However, this level of sensitivity has not been demonstrated before.”
Researchers from Southampton University supported the development of the flexible, stretchable sensor material, which could be easily integrated into bendable electronics and smart fabrics. The paper shows how the material could be bent and stretched for numerous cycles without significant changes in its response.
The Loughborough team characterised the new material’s electrical properties, demonstrating how it functioned up to a frequency of 26GHz, into the spectrum of 5G communications technologies.
The team suggest that with ‘anisotropic’ properties that change how the material interacts with electric fields in different directions, the composite could be further tailored to enhance or reduce sensitivity to specific wireless signals.
The technology could underpin a wide range of additional future applications including vital sign monitoring, radar sensing, satellite communications, and 6G wireless networks.
The research was supported by the Engineering and Physical Sciences Research Council (EPSRC), the Royal Society, and the Royal Academy of Engineering and Office of the Chief Science Adviser for National Security. colleagues from PragmatIC Semiconductor, Cambridge, contributed to the paper.
Promoted content: Does social media work for engineers – and how can you make it work for you?
So in addition to doing their own job, engineers are expected to do the marketing department´s work for them as well? Sorry, wait a minute, I know the...